PVC and Aluminium Sliding Gates
Estimate your fence costs in few easy steps
When the gate matches a solid PVC fence, it carries the same tongue and groove panels, so the privacy line runs unbroken across the driveway. Picket and aluminium gates follow the look of their own fence.
Optional Centsys D5 automation with safety sensors that stop the gate the moment something is in its path. Manual gates secure with a mortise lock.
On a solid panel gate the infill blocks sound to the same level as the fence beside it, and white buffer rollers with a stopper take up the contact so the gate runs and closes without slamming or rattling.
PVC infills are UV stabilised virgin material that will not yellow, rot, or need repainting, and the aluminium frame and track resist rust in coastal salt air.
Every gate is matched to your fence model in height and finish, so the entrance reads as part of the boundary, made to your opening with no fixed sizes.
An aluminium frame holds a wide span straight without sagging, with track, catcher, and gate posts anchored in concrete to carry the gate through daily use.
Overview
Sliding gates open sideways, running along an aluminium track, opening parallel to your fence rather than swinging out. It suits sloped blocks, wide openings and spaces where there is no room for a gate to swing back. Single gates up to 8m, with telescopic up to 12m, with the height matching your fence up to 2.1m.
The frame is always aluminium. The infill follows your fence model, whether solid PVC panels, PVC pickets, or full aluminium, so the gate reads as part of the boundary rather than standing apart from it.
Manual gates lock with a mortise lock. Automated gates run on a Centsys D5 motor with mains, low voltage, or solar power.
We deliver Australia-wide from our Kingston and Sunshine Coast warehouses.
Gate Style
Sliding
Frame
Aluminium
Infill
PVC or Aluminium
Maximum Width
12m
Maximum Height
2.1m
Colour
White
Operation
Manual or automated
Automation
Centsys D5 Smart motor
Power
Mains/Low Voltage/Solar
Track
Aluminium
Locking
Mortise Lock
Hardware Finish
White
Opens along the fence, not into the driveway
A sliding gate travels sideways on an aluminium track, parallel to your boundary. There is no swing arc to clear, no leaf pushing into the driveway, and no risk of the gate catching on a parked car or rising ground. On a short driveway or a sloped block, that is often the only layout that works. The gate parks beside the fence when open and closes flush with the post, keeping the entrance clean.
Aluminium frame, built for the span
The frame is aluminium across every model. A driveway gate covers a wider opening than a fence panel, and aluminium holds that span straight without sagging or flexing over time. Widths run up to 8m as standard 12m for telescopic, with the height matching your fence up to 2.1m. Wider spans are available at added cost and lead time.
Infill that matches your fence
The infill follows whatever fence model runs along your boundary. Solid PVC panels for full privacy fences, PVC pickets for semi-privacy designs, or full aluminium where the fence itself is aluminium. The gate carries the same profile and finish, so the boundary reads as one continuous line across the driveway.
Centsys automation or manual lock
Every gate is ready for a Centsys D5 motor running on 240V mains, low voltage, or solar power. Have it fitted with the gate, or wire it now and add the motor later. Manual gates close with a mortise lock. Buffer rollers and a stopper keep the gate running quietly along its track, and a catcher holds it firm at the closed end.
Customer Reviews
No reviews yet
Write a Review
No questions yet
Ask a Question
Compare
with similar items
Aluminium framed sliding gates that open sideways along your fence, needing no clearance to swing back. Built for short driveways, sloped blocks, and wide openings where a swing gate will not fit. Ready for Centsys automation or manual operation.
Swing gates that open on hinges as a single or double leaf, in white PVC to match your fence or in aluminium for taller and wider openings. The classic driveway entrance, with self closing hinges and a key lockable latch as standard.
